DJI OSMO 짧은 소고

처음 엘리스로부터 넘겨받은 DJI OSMO는 일단 문제가 있었다. 헤드가 이미 헐거워진 상태였다. 불량품을 받은 것이다. 하지만 처음 접하는것이니 이것이 불량인지 아닌지 모르고 지냈다. 원래 팬소음이 크다는 얘기는 들었기에, 덜컹거리는 소음도 팬소음에 일부라 생각했다. 근데 아니더라… 불행중 다행이도, 영상이 촬영되지 않는 문제로 A/S를 접수하여, 이 제품 자체가 문제가 있었음을 파악했다.

이제 눈을 돌려, 오스모 악세사리에 대한 생각을 하기 시작했다. 외부 마이크를 확장 툴없이 기본적인 구성에서 손쉽게 탈부착할 수있는 아이템이 필요했다.


또 다른 하나는 사용후에 세워놓을수 있는 스탠드가 있었으면 하는것이었는데, 이렇게 3d 프린터로 출력해서 판매하는 판매자들이 이미 있었다.

ImageUploadedByPhantomPilots - DJI Phantom Forum1447106125.830817.jpgImageUploadedByPhantomPilots - DJI Phantom Forum1447106117.495904.jpg

소소한 아이템이지만, 3D프린터가 필요할때가 있겠구나라는 생각이 잠시 들었다.

Lily 결국 연기 되다.


릴리 캠이 결국 여름으로 출시를 연기했다. 지난주에 릴리 시연 영상을 내보낸것이, 금번 연기에 대한 선구매자들의 의심을 종식시키기 위한 액션이었던것이다. 분명 영상을 통해서 이 제품이 하루 이틀 사이에 모디파이 되어 2월에 배송을 시작할거라는 기대를 하진 않았다.

아래의 내용은 릴리에서 공식적으로 포스팅한 내용이다.

그리고 매일 매일 그들이 진척 여부를 알 수 있는 내용이다.

Shipping and Fundraising Update

December 17th, 2015

Dear Lily Community,

Over the past few weeks, we’ve delivered several engineering and manufacturing updates to your inbox. If you have been following along, you already know that we’ve redesigned the tracker, set up and tested our production line, and recorded video using the first units off the line.

Right now, our team is working relentlessly on Lily Camera’s flight control software. We’ve hit some challenges there, but rest assured, it’s nothing our team can’t handle. We just need more time. To accommodate flight software optimization, hardware improvements, and additional rounds of testing, we will be delaying pre-order shipments until Summer 2016. This was not a decision taken lightly. The key elements that led us to adjust our production timeline are outlined below:

  • We hit roadblocks with our flight software. After launching our pre-order campaign, component optimizations required us to redesign core parts of our flight software to achieve smoother and more stable flight. This turned out to be a larger undertaking than expected. Due to the enhancements we made, Lily Camera now has more stable and responsive flight capabilities.
  • We made important modifications to Lily Camera hardware. First, we added a waterproof sonar sensor for flight stability. Second, we upgraded our computer vision processing unit to enhance tracking performance. Third, Lily Camera’s internal structure was redesigned to reduce weight and increase strength.
  • We need more time for testing. We have produced a total of 200 units so far and our team has started taking these out into the world. In order to thoroughly test the software and hardware updates we’ve developed over the past few months, we need to test Lily Camera in the most extreme conditions your adventures will take it. This includes (but is not limited to) high altitudes, breakneck speeds, rough and tumble waves, and beyond.

Lily is now 37 individuals strong and we are confident about the solutions our crew has put in place to address each of the issues listed above. We believe all of these changes are significant and it is our responsibility to not overlook them. Perfecting your Lily experience is our number one priority, always.

In the interest of transparency, we’d also like to shed some light on our financials. Some of you have asked about the status of your pre-order funds. As you may know, we are a privately funded company, not a crowd-funded project. This means that we are not using your money to run the company. Every pre-order dollar we’ve received has been placed in cold storage. We have no plans to use a single cent of that money until your Lily Camera goes into final production.

So how are we handling 37 salaries, operational costs, and R&D?

Today, we’re pleased to share that we have secured a total of 15 million dollars in private funding. Our investors include Spark Capital, SV Angel, the Stanford-StartX Fund, as well as musician Steve Aoki and football legend Joe Montana (more details here). We are very fortunate to have the support of this incredible group of people. This backing allows us to progress toward our ship date, expand the team as needed, and remain laser-focused on delivering a state of the art flying camera to you in Summer 2016.

As our engineering team continues to tackle interesting challenges, we want you to have the highest level of visibility on our day-to-day progress. That’s why we’ve decided to post daily updates straight from the team, right here. If at any point you would like to learn more about these updates, send a note over to Customer Experience at

As always, we can provide you with a full refund anytime from the moment you purchase your Lily Camera until 30 days after your order arrives, no questions asked. Just email us with your order number and the email address you used to place your order, and you’ll be all set.

With that said, we hope each and every one of you remains on this journey with us. Stay tuned.


Antoine and Henry